It can be used over a variety of substrates including concrete block, poured concrete, ICFs and stone foundations.
eF-Coat™ is a proprietary blend of latex acrylics specially formulated to provide a resilient, stucco-like finish with superior weathering characteristics.
Stays Flexible: Forms a continuous, seamless coating.
Textured Appearance: Can be troweled or sprayed in a variety of finishes. Water Resistant: Withstands wind-driven rain, salt spray and most chemicals.
Seals Tightly: Prevents air and water intrusion.
Low Maintenance: Low maintenance requirements and easy clean up. Excellent Paintable Surface: Provides an excellent paintable surface
Non-Toxic: Safe for both interior and exterior use and has no odor when cured. Resists Mold & Mildew: eF-Coat has a breathable finish with added fungicides.
Superior Adhesion: Adheres tightly to the surface without tearing or pulling away.
UV GUARD® Mortar Match is a highly elastic, non-structural finish formulated from 100 percent pure acrylic resins. It was specifically developed to seal existing mortar joints and other construction related areas where maximum elasticity or moisture protection is required and/or where a textured appearance is desired.
Additionally, UV GUARD Mortar Match may be used to repair non-structural mortar joints and restore their original appearance. It may be used with or without a backer rod; however, for optimum joint design a small backer rod or bond breaker is recommended on joint depths greater than 1/2".
Repell - Ox™ 1048 Clear Water Repellant is a clear masonry and concrete sealer specifically designed for use on exterior porous surfaces to repel water. It is an advanced, exceptionally strong and highly protective coating formulated to provide outstanding water resistance.
Repell-Ox 1048 was developed to treat a wide variety of mineral substrates including, but not limited to: architectural concrete, concrete block, split-face block, pavers, cementitious stucco, porous brick, natural and synthetic stone, terra cotta and clay tile, dense brick, granite and exposed aggregate concrete.
is a translucent sealer specifically designed for use on exterior porous surfaces to repel water. It is an advanced, exceptionally strong and highly protective coating formulated to provide outstanding water resistance.
Repell-UV was developed to treat substrates including, but not limited to: simulated stone panels and simulated stone foam extrusions. Repell-UV 1045 is also safe to use on interior surfaces and is especially good for areas that receive extra amounts of sunlight.
Stringent testing during which Repell-UV 1045 was subjected to high levels of sunlight, moisture and temperature extremes proved that Repell-UV 1045 lasted longer and provided greater protection than major competitors.
